Skip to main content

Publications

Publications – Charles Augarde
September 2024

Refereed Journal papers | Books | Edited Books | Chapters in Books | Conferences | Theses

Journal papers under review

  • Sharif et al. Comparison of 1g and centrifuge modelling of drag embedment anchors with subsurface wireless tracking, resubmitted to the International Journal of Physical Modelling in Geotechnics, September 2024.
  • Pretti, G., Bird, R., Gavin, N., Augarde, C.E., Coombs, W.M. A stable poro-mechanical formulation for Material Point Methods leveraging overlapping meshes and multi-field ghost penalisation, submitted to the International Journal for Numerical Methods in Engineering, May 2024
  • Thompson, D., Augarde, C.E., Osorio, J.P. A review of techniques aimed at enhancing the material properties of rammed earth, through the application of chemical stabilisation and fibre reinforcement., submitted to Journal of Building Engineering, May 2024.
  • Perić Fekete, A., Augarde, C.E., Hughes, P.N., Kraus, I. Unsaturated behaviour of rammed earth in residential dwellings, submitted to the Journal of Building Engineering, May 2024.

Refereed journal papers – published (titles or URLs link to official sources)

J101Bird, R., Pretti, G., Coombs, W.M., Augarde, C.E., Sharif, Y.U., Brown, M.J., Carter, G., Macdonald, C., Johnson, K. An implicit material point-to-rigid body contact approach for large deformation soil-structure interaction accepted for Computers and Geotechnics, July 2024.
J100Pretti, G., Coombs, W.M., Augarde, C.E., Marchena Puivert, M., Reyna Gutierriez, J.A. 2024. Preserving non-negative porosity values in a bi-phase elasto-plastic material under Terzaghi’s effective stress principle. Mechanics of Materials, Volume 192,104958.
J99Gavin, N.D., Pretti, G., Coombs, W.M., Brigham, J.C., Augarde, C.E. 2024. On the Implementation of a Material Point-Based Arc-Length Method. International Journal for Numerical Methods in Engineering, online 6 February 2024.
J98O’Hare, T., Gourgiotis, P., Coombs, W.M., Augarde, C.E. An implicit Material Point Method for micropolar solids undergoing large deformations. Computer Methods in Applied Mechanics and Engineering, Volume 419, 1 February 2024, 116668.
J97Bird, R.E, Coombs, W.M., Giani, S., Sims, B., Augarde, C.E., Huynh, T.P., Duddu, R. 2023.
An hp-adaptive discontinuous Galerkin method for phase field fracture. Computer Methods in Applied Mechanics and Engineering, Volume 416, 1 November 2023, 116336.
J96Wang, J., Hughes, P.N., Augarde, C.E. 2023. Towards A Predictive Model of the Shear Strength Behaviour of Fibre Reinforced Clay. European Journal of Environmental and Civil Engineering, 28(2), 380-400.
J95Pretti, G., Coombs, W.M., Augarde, C.E., Sims, B., Marchena Puigvert, M, Reyna Gutierrez, J.A. 2023. A conservation law consistent updated Lagrangian material point method for dynamic analysis. Journal of Computational Physics, 485, 112075.
J94Thompson, D., Augarde, C.E., Osorio, J.P. 2022. A review of current construction guidelines to inform the design of rammed earth houses in seismically active zones. Journal of Building Engineering, 54, 104666.
J93Wilkinson, G., Augarde, C.E. 2022. A serviceability investigation of dowel-type timber connections featuring single softwood dowels. Engineering Structures, 260: 114210
J92Muguda, S., Hughes, P., Augarde, C.E., Perlot, C., Bruno, A.W., Gallipoli, D. 2022. Crosslinking of biopolymers for stabilising earthen construction materials. Building Research & Information, 50(5):502-524.
J91Davidson, C., Brown, M.J., Cerfontaine, B., Knappett, J.A., Brennan, A.J., Al-Baghdadi, T., Augarde, C., Coombs, W., Wang, L., Blake, A., Richards, D.J. & Ball, J.D. 2022. Physical modelling to demonstrate the feasibility of screw piles for offshore jacket-supported wind energy structures. Géotechnique, 72(2), 108-126. (online since 2020, Geotechnical Research Medal Winner 2023.)
J90Pretti, G., Coombs, W.M., Augarde, C.E. 2022. A displacement-controlled arc length solution scheme. Computers and Structures, 258:106674.
J89Cuccurullo, A., Gallipoli, D., Bruno, A.W., Augarde, C.E., Hughes, P.N., La Borderie, C. 2021. A comparative study of the effects of particle grading and compaction effort on the stiffness and strength of earthen materials at different humidities. Construction and Building Materials 306:124770.
J88Augarde, C.E., Lee, S.J., Loukidis, D. 2021. Numerical modelling of large deformation problems in geotechnical engineering: a state-of-the-art review. Soils and Foundations, 61(6):1718-1735.
J87Fan, L., Coombs, W.M., Augarde, C.E.  2021. An adaptive local maximum entropy point collocation method for linear elasticity. Computers & Structures 256, 106644.
J86Wang, J., Hughes, P.N., Augarde, C.E. 2023. Effects of fibre additions on the tensile strength and crack behaviour of unsaturated clay. Proceedings of the Institution of Civil Engineers – Ground Improvement, 176(2):108-120. (available online since 2021).
J85Vincenzini, A., Augarde, C.E., Gioffrè, M. 2021. Experimental characterization of natural fibre-soil interaction: lessons for earthen construction. Materials and Structures, 54 (Article 110).
J84Wang, L., Coombs, W.M., Augarde, C.E. et al. 2021. An efficient and locking-free material point method for three dimensional analysis with simplex elements. International Journal for Numerical Methods in Engineering, 122:3876-3899. https://doi.org/10.1002/nme.6685
J83Sharif, Y. U., Brown, M. J., Cerfontaine, B., Davidson, C., Ciantia, M. O., Knappett, J., Brennan, A., Ball, J. D., Augarde, C. E., Coombs, W. M., Blake, A., Richards, D., White, D., Huisman, M., Ottolini, M. 2021. Effects of screw pile installation on installation requirements and in-service performance using the discrete element method. Canadian Geotechnical Journal, 58(9): 1334-1350. https://doi.org/10.1139/cgj-2020-0241
J82Cuccurullo, A., Gallipoli, D.,  Bruno, A.W., Augarde, C., Hughes, P., La Borderie, C. 2020. Earth stabilisation via carbonate precipitation by plant-derived urease for building applications. Geomechanics for Energy and the Environment, Available online 14 December 2020, 100230. https://doi.org/10.1016/j.gete.2020.100230
J81Robinson, S., Brown, M., Matsui, H., Brennan, A., Augarde, C. E., Coombs, W. M. & Cortis, M. 2020. A cone penetration test (CPT) approach to cable plough performance prediction based upon centrifuge model testing. Canadian Geotechnical Journal58(10):1466-1477. https://doi.org/10.1139/cgj-2020-0366
J80Hashim, N.A.A., Coombs, W.M., Augarde, C.E., Hattori, G. 2020. An implicit non-ordinary state-based peridynamics with stabilised correspondence material model for finite deformation analysis. Computer Methods in Applied Mechanics and Engineering, 371, 113304. https://doi.org/10.1016/j.cma.2020.113304
J79Nguyen, K.D., Augarde, C.E., Coombs, W.M., Nguyen-Xuan, H.,  Abdel-Wahab, M., 2020. Non-conforming multipatches for NURBS-based finite element analysis of higher-order phase-field models for brittle fracture. Engineering Fracture Mechanics, 235, 107133 https://doi.org/10.1016/j.engfracmech.2020.107133
J78Cerfontaine, B., Knappett, J.A., Davidson, C., Brown, M.J., Brennan, A.J., Al-Baghdadi, T., Augarde, C., Coombs, W., Wang, L., Blake, A., Richards, D.J. & Ball, J.D. 2020. A finite element approach for determining the full load-displacement relationship of axially-loaded screw anchors, incorporating installation effectsCanadian Geotechnical Journal, 58(4), 565-582.
J77Muguda, S., Lucas, G., Hughes, P.N., Augarde, C.E., Perlot, C., Bruno, A.W., Gallipoli, D. 2020. Durability and hygroscopic behaviour of biopolymer stabilised earthen construction materials. Construction and Building Materials, 259: 119725 https://doi.org/10.1016/j.conbuildmat.2020.119725
J76Cuccurullo, A., Gallipoli, D., Bruno, A.W., Augarde, C., Hughes, P.N., La Borderie, C.  2019. Influence of particle grading on the hygromechanical properties of hypercompacted earth. Journal of Building Pathology and Rehabilitation, https://link.springer.com/article/10.1007/s41024-019-0066-4
J75Coombs, W.M., Augarde, C.E. 2020. AMPLE: A Material Point Learning Environment. Advances in Engineering Software. 139:102748. https://www.sciencedirect.com/science/article/pii/S0965997819304648 See the AMPLE webpages here
J74Lu, K., Augarde, C.E., Coombs, W.M., Hu, Z. 2020. An implicit boundary finite element method with extension to frictional sliding boundary conditions and elasto-plasticity problems. Computer Methods in Applied Mechanics and Engineering, 358: 112620. https://www.sciencedirect.com/science/article/pii/S004578251930502X
J73Coombs, W.M., et al. 2020. On Lagrangian mechanics and the implicit material point method for large deformation elasto-plasticity. Computer Methods in Applied Mechanics and Engineering 358:112622.  https://doi.org/10.1016/j.cma.2019.112622
J72Wang, L., Coombs, W.M., Augarde, C.E., Cortis, M., Charlton, T.J., Brown, M., Knappett, J., Brennan, A., Davidson, C., Richards, D., Blake, A. 2019. On the use of advanced domain-based material point methods for problems involving large distortion. Computer Methods in Applied Mechanics and Engineering, 355:1003-1025. https://doi.org/10.1016/j.cma.2019.07.011
J71Ai, W., Augarde, C.E. 2019. Thermoelastic fracture modelling in 2D by an adaptive cracking particle method without enrichment functions. International Journal of Mechanical Sciences,160:343-357. https://doi.org/10.1016/j.ijmecsci.2019.06.033
J70Ai, W., Bird, R., Coombs, W.M., Augarde, C.E. 2019.  A configurational force driven cracking particle method for modelling crack propagation in 2D. Engineering Analysis with Boundary Elements, 104:197-208. doi.org/10.1016/j.enganabound.2019.03.008 (Open Access).
J69Lu, K., Augarde, C.E., Coombs, W.M., Hu, Z. 2019. Weak impositions of Dirichlet boundary conditions in solid mechanics: a critique of current approaches and extension to partially prescribed boundaries. Computer Methods in Applied Mechanics and Engineering, 348:632-659. doi.org/10.1016/j.cma.2019.01.035
J68Bing, Y., Cortis, M., Charlton, T.J., Coombs, W.M., Augarde, C.E. 2019. B-spline based boundary conditions in the material point method. Computers and Structures, 212:257-274. doi.org/10.1016/j.compstruc.2018.11.003. (Open Access).
J67Robinson, S., Brown, M.J., Matsui, H., Brennan, A., Augarde, C., Coombs, W. & Cortis, M. 2018. Centrifuge testing to verify scaling of offshore pipeline ploughs, International Journal of Physical Modelling in Geotechnics, published online 09 October 2018. doi.org/10.1680/jphmg.17.00075
J66Beckett, C.T.S., Augarde, C.E., Easton, D., Easton, T.  2018.  Strength characterisation of soil-based construction materials, Géotechnique, 68(5):400-409.  doi.org/10.1680/jgeot.16.P.288
J65Ai, W., Augarde, C.E. 2018. A Multi-Cracked Particle Method for Complex Fracture Problems, Mathematics and Computers in Simulation, 150:1-24.  doi.org/10.1016/j.matcom.2018.02.005
J64Fan, L., Coombs, W.M., Augarde, C.E., 2018. The point collocation method with a local maximum entropy approach,Computers and Structures, 201:1-14. https://www.sciencedirect.com/science/article/pii/S004579491730901X.
J63Ai, W., Augarde, C.E. 2018. An adaptive cracking particle method providing explicit and accurate description of 3D crack surfaces.International Journal for Numerical Methods in Engineering, 114(12):1291-1309  10.1002/nme.5786
J62Coombs, W.M., Charlton, T.J., Cortis, M., Augarde, C.E., 2018. Overcoming volumetric locking in material point methods, Computer Methods in Applied Mechanics & Engineering, 333:1-21. https://doi.org/10.1016/j.cma.2018.01.010  (Open Access).
J61Muguda, S., Booth, S., Hughes, P.N., Augarde, C.E., Perlot, C., Bruno, A.W., Gallipoli, D. 2017. Mechanical properties of biopolymer-stabilised soil-based construction materials, Géotechnique Letters, 7(4):309-314. http://www.icevirtuallibrary.com/doi/abs/10.1680/jgele.17.00081
J60Cortis, M., Coombs, W.M., Augarde, C.E., Brown, M.J.Z., Brennan, A., Robinson, S. 2018. Imposition of essential boundary conditions in the material point method, International Journal for Numerical Methods in Engineering, 113(1):130-152. 10.1002/nme.5606 (open access)
J59Charlton, T.J., Coombs, W.M.,  Augarde, C.E.  2017.  iGIMP: An implicit Generalised Interpolation Material Point Method for large deformation elasto-plasticity, Computers and Structures 190:108-125. doi.org/10.1016/j.compstruc.2017.05.004  (open access)
J58Readle, D, Coghlan, S, Smith, J.C., Corbin, A.J. and Augarde, C.E. 2016. Fibre reinforcement mechanisms in earthen construction materials.  ICE Proceedings – Construction Materials, 169(5):252-260. 10.1680/jcoma.15.00039
J57Ciancio, D., Beckett, C.T.S., Augarde, C.E., Jaquin, P.A. 2016. Report of the 1st International Conference on Rammed Earth Construction. ICE Proceedings – Construction Materials, 169(5):271-275. 10.1680/jcoma.15.00038
J56Ai, W., Augarde, C.E. 2016. An Adaptive Cracking Particle Method for 2D Crack Propagation, International Journal for Numerical Methods in Engineering, 108(13):1626–1648.   10.1002/nme.5269
J55Chambers, P., Augarde, C.E., Reed, S., Dobbins, A. 2016. Temporary propping at Crossrail Paddington Station. ICE Proceedings – Geotechnical Research, 3(1): 3-16. 10.1680/jgere.15.00009  (open access)
J54Hattori, G, Trevelyan, J., Augarde, C.E., Coombs, W.M., Aplin, A.C. 2016. Numerical simulation of fracking in shale rocks: current state and future approaches, Archives of Computational Methods in Engineering, 1-37. 10.1007/s11831-016-9169-0
J53Ullah, Z., Augarde, C.E., Coombs, W.M. 2016. Parallel computations in nonlinear solid mechanics using adaptive finite element and meshless methods, Engineering Computations, 33(4):1161-1191. 10.1108/EC-06-2015-0166
J52Beckett, C.T.S., Smith, J.C., Ciancio, D., Augarde, C.E. 2015. Tensile strengths of flocculated compacted unsaturated soils, Géotechnique Letters 5(4): 254-260. 10.1680/jgele.15.00087
J51Dai, S.,  Augarde, C.E., Du, C., Chen, D. 2015.  A fully automatic polygon scaled boundary finite element method for modelling crack propagation. Engineering Fracture Mechanics, 133:163-178. 10.1016/j.engfracmech.2014.11.011
J50Corbin, A., Augarde, C.E. 2014. Fracture Energy of Stabilised Rammed Earth. Procedia Materials Science, 3:1675–1680. 10.1016/j.mspro.2014.06.270
J49Zhuang, X., Cai, Y., Augarde C.E. 2014.  A meshless sub-region radial point interpolation method for accurate calculation of crack tip fields. Theoretical and Applied Fracture Mechanics, 69:118-125. 10.1016/j.tafmec.2013.12.003
J48Zhuang, X., Zhu, H., Augarde, C.E. 2014. An improved meshless Shepard and least square method possessing the delta property and requiring no singular weight function.  Computational Mechanics, 53:343-357.. 10.1007/s00466-013-0912-1
J47Ullah, Z., Coombs, W.M., Augarde, C.E. 2013. An adaptive finite element/meshless coupled method based on local maximum entropy shape functions for linear and nonlinear problems. Computer Methods in Applied Mechanics and Engineering, 267:111-132, 10.1016/j.cma.2013.07.018
J46Ciancio, D., Augarde, C.E. 2013. Capacity of unreinforced rammed earth walls subject to lateral wind force: elastic analysis vs. ultimate strength analysis.  Materials & Structures,  46(9):1569-1585, 10.1617/s11527-012-9998-8
J45Beckett, C.T.S., Augarde, C.E. 2013. Prediction of soil water retention properties using pore size distribution and porosity. Canadian Geotechnical Journal 50(4):435-450, 10.1139/cgj-2012-0320
J44Beckett, C.T.S., Hall, M.R., Augarde, C.E. 2013. Macrostructural changes in compacted earthen construction materials under loading, Acta Geotechnica, 8(4):423-438. 10.1007/s11440-012-0203-6
J43Ullah, Z., Augarde, C.E. 2013. Finite deformation elasto-plastic modelling using an adaptive meshless method. Computers and Structures, 118:39–52. 10.1016/j.compstruc.2012.04.001
J42Smith, J.C., Augarde, C.E. 2013. Optimum water content tests for earthen construction materials. Proceedings of the ICE: Construction Materials, 167(2):114-123.  10.1680/coma.12.00040
J41Zhang, Y., Gallipoli, D., Augarde, C.E. 2013. Parameter identification for elasto-plastic modelling of unsaturated soils from pressuremeter tests by parallel modified particle swarm optimization. Computers and Geotechnics, 48:293-303. 10.1016/j.compgeo.2012.08.004
J40Coombs, W.M., Crouch, R.S., Augarde C.E. 2012. A unique Critical State two-surface hyperplasticity model for fine-grained particulate media, Journal of the Mechanics and Physics of Solids, 61:175-189. 10.1016/j.jmps.2012.08.002
J39Zhuang, X., Augarde, C.E., Mathisen, K. 2012. Fracture modelling using meshless methods and level sets in 3D: framework and modelling. International Journal for Numerical Methods in Engineering, 92:969-998. 10.1002/nme.4365       ERRATUM NOTE HERE
J38Zhuang, X., Heaney, C.E., Augarde, C.E. 2012. On error control in the element-free Galerkin method. Engineering Analysis with Boundary Elements, 36(3):351-360. 10.1016/j.enganabound.2011.06.011
J37Lourenço, S.D.N., Gallipoli, D., Augarde, C.E., Toll, D.G., Fisher, P.C., Congreve, A. 2012. Formation and evolution of water menisci in unsaturated granular media. Géotechnique, 62(3):193-199. 10.1680/geot.11.P.034
J36Lourenço, S.D.N., Gallipoli, D., Augarde, C.E., Toll, D.G., Evans, F.D. 2011. Towards a tensiometer based suction control system for laboratory testing of unsaturated soils. Geotechnical Testing Journal, 34(6):755-764. 10.1520/GTJ103755
J35Beckett, C.T.S., Augarde, C.E. 2011. A novel image-capturing technique for the experimental study of soil deformations during compaction. Geotechnical Testing Journal, 34(6):571-578.  10.1520/GTJ103517
J34Beckett, C.T.S., Augarde, C.E. 2011. Structure creation in earthen construction materials: information from dry soil mixtures. Frontiers of Architecture and Civil Engineering in China, 5(2):151-159. 10.1007/s11709-011-0109-7
J33Sheng, D.,  Augarde C.E., Abbo, A. 2011. A fast algorithm for finding the first intersection with a non-convex yield surface. Computers and Geotechnics, 38:465-471. 10.1016/j.compgeo.2011.02.008
J32Bordas S.P.A., Natarajan, S., Kerfriden, P., Augarde, C.E., Mahapatra, D.R., Rabczuk, T., Dal Pont, S. 2011. On the performance of strain smoothing for quadratic and enriched finite element approximations (XFEM/GFEM/PUFEM). International Journal for Numerical Methods in Engineering, 86(4-5):637-666.  10.1002/nme.3156
J31Zhuang, X., Augarde, C.E., Bordas, S.P.A. 2011. Accurate fracture modelling using meshless methods, the visibility criterion and level sets: Formulation and 2D modelling. International Journal for Numerical Methods in Engineering, 86:249-268. 10.1002/nme.3063
J30Tarantino A., Gallipoli D., Augarde C.E., De Gennaro, V., Gomez, R., Laloui, L.,Mancuso, C.,McCloskey, G., Munoz, J., Pereira, J-M., Peron, H., Pisoni, G., Romero, E., Raveendiraraj, A., Rojas, J.C., Toll, D.G., Tombolato, S.,Wheeler, S. 2011. Benchmark of experimental techniques for measuring and controlling suction. Géotechnique, 61:303-312. 10.1680/geot.2011.61.4.303
J29Lourenço,  S.D.N. , Gallipoli, D. , Toll, D.G., Augarde, C.E., Evans, F.D. 2011. A new procedure for the determination of soil water retention curves by continuous drying using high suction tensiometers. Canadian Geotechnical Journal, 48:327-335. 10.1139/T10-062
J28Toll, D.G., Lourenço,  S.D.N., Mendes, J., Gallipoli, D.,  Evans, F.D., Augarde, C.E., Cui, Y.J., Tang, A.M., Rojas Vidovic, J.C., Pagano, L., Mancuso, C., Zingariello, C., Tarantino, A. 2011. Soil suction monitoring for landslides and slopes. Quarterly Journal of Engineering Geology and Hydrogeology, 44:23-33. 10.1144/​ 1470-9236/​09-010
J27Heaney, C.E., Augarde, C.E., Deeks, A.J. 2010.  Modelling elasto-plasticity using the hybrid MLPG method.  Computer Modeling in  Engineering and Sciences, 56(2)153-178.
J26Coombs, W.M., Crouch, R.S., Augarde, C.E. 2010. Reuleaux plasticity: analytical backward Euler stress integration and consistent tangent. Computer Methods in Applied Mechanics and Engineering, 199:1733-1743 10.1016/j.cma.2010.01.017
J25Bird, G.E., Trevelyan, J., Augarde, C.E. 2010. A coupled BEM/Scaled boundary FEM formulation for accurate computations in linear elastic fracture mechanics. Engineering Analysis with Boundary Elements, 34(6):599-610, 10.1016/j.enganabound.2010.01.007
J24Cai, Y., Zhuang, X., Augarde, C.E. 2010. A new partition of unity finite element free from the linear dependence problem and possessing the delta property. Computer Methods in Applied Mechanics and Engineering, 199: 1036-1043 10.1016/j.cma.2009.11.019.
J23Zhuang, X., Augarde, C.E. 2010. Aspects of the use of orthogonal basis functions in the element free Galerkin method. International Journal for Numerical Methods in Engineering, 81(3):366-380. 10.1002/nme.2696. pdf
J22Jaquin, P.A., Augarde, C.E., Gallipoli, D., Toll, D.G. 2009. The strength of unstabilised rammed earth materials. Géotechnique. 59, No. 5, 487–490 10.1680/geot.2007.00129  pdf
J21Zhang, Y., Gallipoli, D., Augarde, C.E. 2009. Simulation-based calibration of geotechnical parameters using parallel hybrid moving boundary particle swarm optimisation. Computers and Geotechnics. 36, 604-615 10.1016/j.compgeo.2008.09.005.
J20Shiau, J., Augarde, C.E., Lyamin, A.V. & Sloan, S.W. 2008. Finite element limit analysis of passive earth resistance in cohesionless soils. Soils and Foundations, 48(6):843-850. pdf
J19Lourenço, S.D.N., Gallipoli, D., Toll, D.G., Augarde, C.E., Evans, F.D., Medero, G.M. 2008. Calibrations of a high suction tensiometer. Géotechnique, 58(8):659–668 10.1680/geot.2008.58.8.659
J18Augarde, C.E., Deeks, A.J. 2008. The use of Timoshenko’s exact solution for a cantilever beam in adaptive analysis, Finite Elements in Analysis and Design, 44(9-10): 525-656. ADDENDUM HERE WITH CORRECTION pdf 
J17Jaquin, P.A., Augarde, C.E., Gerrard, C.M. 2008. A chronological description of the spatial development of rammed earth techniques, International Journal of Architectural Heritage: Conservation, Analysis, and Restoration, 2(4):377-400. 10.1080/15583050801958826.
J16Augarde, C.E., Ramage, A., Staudacher, J. 2007. Element-based preconditioners for elasto-plastic problems in geotechnical engineering, International Journal for Numerical Methods in Engineering, 71:757-779. pdf 10.1002/nme.1947
J15Deeks, A.J., Augarde, C.E. 2007. A hybrid meshless Petrov-Galerkin method for unbounded domains, Computer Methods in Applied Mechanics and Engineering, 196, 843-852. pdf  10.1016/j.cma.2006.06.011
J14Augarde, C.E., A. Ramage, A., Staudacher, J. 2006. An element-based displacement preconditioner for linear elasticity problems. Computers and Structures, 84, 2306–2315. pdf    10.1016/j.compstruc.2006.08.057
J13Augarde, C.E. , Burd, H.J., Houlsby, G.T. 2005. Discussion on “The Influence of Building Weight on Tunnelling-induced ground and Building Deformation” (Paper No.3114). Soils and Foundations, 45(4) 166-167.
J12Wisser, C., Augarde, C.E., Burd, H.J. 2005. Numerical modelling of compensation grouting above a shallow tunnel. International Journal for Numerical and Analytical Methods in Geomechanics, 29(5), 443-471. 10.1002/nag.421
J11Deeks, A.J. and Augarde, C.E. 2005. A meshless local Petrov-Galerkin scaled boundary method. Computational Mechanics, 36:159-170.  10.1007/s00466-004-0649-y
J10Augarde, C.E., Deeks, A.J. 2005. On the effects of nodal distributions for imposition of essential boundary conditions in the MLPG meshfree method, Communications in Numerical Methods in Engineering, 21:389-395. pdf  10.1002/cnm.755
J9Augarde, C.E. 2004 Generation of shape functions for rectangular plate elements, Communications in Numerical Methods in Engineering. 20: 655-663. pdf
J8Augarde, C.E., Lyamin, A.V., Sloan, S.W. 2003. Stability of an undrained plane strain heading revisited, Computers & Geotechnics, 30:419-430. pdf   10.1016/S0266-352X(03)00009-0
J7Augarde, C.E., Lyamin, A.V., Sloan, S.W. 2003. Prediction of undrained sinkhole collapse, ASCE J. Geotech. Geoenv. Engrg. 129:197-205.  10.1061/(ASCE)1090-0241(2003)129:3(197)
J6Davey, J. D., Augarde, C.E. 2001. Models of skewed masonry arches, The Structural Engineer, 79(7), April, 14-15.
J5Augarde, C.E., Burd, H.J. 2001. Three-dimensional finite element analysis of lined tunnels, International Journal for Numerical and Analytical Methods in Geomechanics, 25:243-262. pdf
J4Liu, G., Houlsby, G.T., Augarde, C.E. 2001. Two-dimensional analysis of settlement damage to masonry buildings due to tunnelling, The Structural Engineer, 79(1), January, 19-25.  pdf
J3Houlsby, G.T., Liu, G., Augarde, C.E. 2000. A tying scheme for imposing displacement constraints in finite element analysis, Communications in Numerical Methods in Engineering, 16(10), October, 721-732. pdf
J2Burd, H.J., Houlsby, G.T., Augarde, C.E., Liu, G. 2000. Modelling the effects on masonry buildings of tunnelling-induced settlement, ICE Proceedings – Geotechnical Engineering, 143(1), January, 17-29. (Telford Prize winner 2001). pdf
J1Augarde, C.E. 1998. Generation of shape functions for straight beam elements. Computers & Structures, 58:555-560. pdf with corrections


Technical reports

T2Ullah, Z., Augarde, C.E., Coombs, W.M. 2013 Local maximum entropy shape functions based FE-EFGM coupling ECS-TR 2013/07.
T1Smith, J.C. & Augarde, C.E. 2013. A new classification for soil mixtures with application to earthen construction, ECS-TR 2013/04..


Books as author

B1Jaquin, P.A. & Augarde, C.E. 2012.  Earth Building: History, science & conservation, IHS BRE Press: Bracknell. ISBN-10: 1848061927.


Books as editor

Be1Toll, D.G, Augarde, C.E., Gallipoli, D. , Wheeler, S.J. (Eds). 2008. Unsaturated Soils. Advances in Geo-Engineering, Proceedings of the 1st European Conference, E-UNSAT 2008, Durham, United Kingdom, 2-4 July 2008, Taylor and Francis, ISBN: 978-0-415-47692-8.


Chapters in books

Ch5Muguda, S., Lucas, G., Hughes, P.N., Augarde, C.E., Cuccurullo, A., Bruno, A.W., Perlot, C., Gallipoli,D. Advances in the use of biological stabilisers and hyper-compaction for sustainable earthen construction materials, in  Venkatarama Reddy et al. (Eds), Earthen Dwellings and Structures, Proceedings of the  International Symposium on Earthen Structures (ISES 2018), August 2018, Bangalore, India. doi.org/10.1007/978-981-13-5883-8_17
Ch4Augarde, C.E. 2012. Strength and Mechanical Behaviour, Chapter 8 of Hall, M.R. et al. (Eds) Modern earth buildings: Materials, engineering, construction and applications, Woodhead Publishing.
Ch3Zhang, Y., Gallipoli, D., Augarde, C.E. 2009. Parallel hybrid particle swarm optimization methods in geotechnical engineering in Cai, Z. et al. (eds) Advances in Computation and Intelligence: Lecture Notes in Computer Science, vol. 5821/2009, 466-475, Springer:Berlin/Heidelberg.
Ch2Augarde, C.E., 2003. Numerical models in soft ground tunnelling, Chap.11 of Progress in Civil and Structural Engineering Computing, (Ed. B.H.V. Topping), Saxe-Coburg Publications: Stirling, ISBN 1-874672-19-9.
Ch1Augarde, C.E., 2001. Settlement induced damage to masonry structures, Chap. 5 of Computational modelling of masonry, brickwork and blockwork structures, (Ed. J.W. Bull), Saxe-Coburg Publications:Stirling, ISBN 1-874672-040.

Refereed conference papers

C115Perić Fekete, A., Augarde, C., Hughes, P., Kraus, I. 2024. Unsaturated Behaviour of Material from a Vernacular Eastern Croatia Rammed Earth House in Proceedings of 2nd International Conference on Earthen Construction, Edinburgh, July 2024, 281-290.
C114Sharif, Y. et al. Characterisation of the penetration behaviour of AC14 anchor in sands, submitted to the 5th European Conference on Physical Modelling in Geotechnics, Delft, October 2024.
C113Bird, R.E., Coombs, W.M., Augarde, C.E., Brown, M.J.Z., Sharif, Y., Carter, G., Johnson, K., Macdonald, C. 2023. Cone Penetration Tests (CPTs) in layered soils: a Material Point approach in Proc. of 10th European Conference on Numerical Methods in Geotechnical Engineering London, 26-28 June.
C112Gavin, N., Bird, R.E., Coombs, W.M., Augarde, C.E. 2023. An open-source Julia code for geotechnical MPM in Proc. of 10th European Conference on Numerical Methods in Geotechnical Engineering London, 26-28 June.
C111Gavin, N.D., Coombs, W.M., Brigham, J.C., Augarde, C.E. 2023. On the development of a material point method compatible arc length solver for large deformation solid mechanics in Proc. 31st UKACM Conference, Warwick, April.
C110O’Hare, T.J., Gourgiotis, P.A., Coombs, W.M., Augarde, C.E. 2023. A geometrically-exact Finite Element Method for micropolar continua with finite deformations in Proc. 31st UKACM Conference, Warwick, April.
C109Cuccurullo, A., Muguda, S., Perlot-Bascoules, C., Gallipoli, D., Hughes, P., Augarde, C. 2022. Comparison of EICP and biopolymer stabilisation for improving the mechanical properties of soil-based building materials in Proc. International Conference on Geomechanics and Geoenvironmental Engineering (iCGMGE-2022), 27-30 Nov 2022, Western Sydney University, Australia (accepted)
C108Coombs, W.M., Wang, L., Augarde, C.E. 2021. Overcoming Volumetric Locking in Three-Dimensional Material Point Analysis in Barla, M. et al. (Eds.) Challenges and Innovations in Geomechanics,Springer International Publishing: Cham, 772-778. Available here 
C107Tarantino, A., and many others including Augarde, C.E. 2020. TERRE project: interplay between unsaturated soil mechanics and low-carbon geotechnical engineering in Proc. 4th European Conference on Unsaturated Soils (E-UNSAT 2020). Available here
C106Cuccurullo A., Gallipoli D., Bruno A.W., Augarde C., Hughes P., La Borderie C. 2020. Soil Stabilization Against Water Erosion via Calcite Precipitation by Plant-Derived Urease. In: Calvetti F. et al. (eds) Geotechnical Research for Land Protection and Development. CNRIG 2019. Lecture Notes in Civil Engineering, vol 40. Springer, Cham. Available here
C105Matsui, H., Robinson, S., Brown, M.J., Brennan, A.J., Cortis, M., Coombs, W.M., & Augarde, C.E. 2019. Investigation into the effect of plough share leading geometry angle on cable plough performance. 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (16 ARC), 14-18th Oct., 2019, Taipei, Taiwan.
C104Cuccurullo, A., Gallipoli, D., Bruno, A.W.,  Augarde, C.E., Hughes, P.N. , La Borderie, C. 2019. Advances in the enzymatic stabilisation of soils in Proceedings of the XVII ECSMGE-2019: Geotechnical Engineering foundation of the future. Available here
C103Wang, J.Y., Hughes, P.N., Augarde, C.E. 2019 CBR strength of London Clay reinforced with polypropylene fibre in Proceedings of the XVII ECSMGE-2019: Geotechnical Engineering foundation of the future. Available here
C102Muguda, S., Hughes, P.N., Augarde, C.E., Perlot, C., Gallipoli, D., Bruno, A.W. 2019. Geotechnical characterisation of recycled biopolymer stabilised earthen materials in Proceedings of the XVII ECSMGE-2019: Geotechnical Engineering foundation of the future. Available here
C101Civelek, K.M., Augarde, C.E., Hughes, P.N.  2019. Hydro-mechanical behaviour of earthen construction material repairs in Proceedings of the XVII ECSMGE-2019: Geotechnical Engineering foundation of the future. Available here
C100Davidson, J.,  Mills, J.P., Haynes, I., Augarde, C., Bryan, P., Douglas, M. 2019. Airborne to UAS LIDAR: an analysis of UAS LIDAR ground control targets, to be presented at UAV-g workshop at ISPRS Geospatial Week 2019
C99Cuccurullo, A., Gallipoli, D., Bruno, A.W., Augarde, C.E., Hughes,P., La Borderie, C.  2018. Influence of soil grading on the hygro-mechancal properties of hyper-compacted earth for masonry construction in  G. Milani, A. Taliercio and S. Garrity (eds.), Proc. 10th IMC, 10th International Masonry Conference, Milan, Italy, July 9-11.
C98Cuccurullo, A., Gallipoli, D., Bruno, A.W.,  La Borderie, C. Augarde, C.E., Hughes, P. 2018. The effect of ambient humidity on the stiffness and strength of a hyper-compacted silty clay for earth building in Proc. 7th International Conference on Unsaturated Soil Mechanics, August 2018, Hong Kong, China.
C97Muguda, S., Booth, S.., Hughes, P.N., Augarde, C.E., Perlot, C.,  Bruno, A.W., Gallipoli, D.  2018 Preliminary study on use of biopolymers in earthen construction, in Proc. 7th International Conference on Unsaturated Soil Mechanics, August 2018, Hong Kong, China.
C96Wang, L., Coombs, W.M., Augarde, C.E., Brown, M.J., Knappett, J., Brennan, A., Davidson, C., Richards, D. & Blake, A. 2018.  On the use of the material point method to model problems involving large rotational deformation in Numerical Methods in Geotechnical Engineering IX, Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE 2018), 585-592, June 25-27, Porto, Portugal.
C95Augarde, C.E., Bing, Y., Charlton, T.J., Coombs, W.M.,  Cortis, M. , Brown, M.J.Z., Brennan, A., Robinson, S. 2018.  Issues with the Material Point Method for geotechnical modelling, and how to address them, in Numerical Methods in Geotechnical Engineering IX, Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE 2018), 593-601, June 25-27, Porto, Portugal.
C94Davidson, C., Al-Baghdadi, T., Brown, M.J., Knappett, J., Brennan, A., Augarde, C.E., Wang, L., Coombs, W.M., Richards, D. & Blake, A. 2018. Centrifuge modelling of optimised screw piles for offshore wind energy foundations. Proc. 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018). 17-20th July 2018, London,. UK. Taylor & Francis Group, London, UK. pp. 695–700. ISBN 9781138344198.
C93Al-Baghdadi, T, Brown, M.J., Davidson, C., Knappett, J., Brennan, A., Wang, L., Coombs, W.M., Augarde, C.E., Richards, D. & Blake, A. 2017. CPT based design procedure for installation torque prediction for screw piles installed in sand. 8th Int. Conf. on Offshore Site Investigation & Geotechnics (SUT OSIG), 12-14th Sept., 2017, London, UK. pp. 346-353.
C92Robinson, S., Brown, M.J., Brennan, A.J., Cortis, M., Augarde, C.E. & Coombs, W.M. 2017. Improvement of seabed cable plough tow force prediction models. 8th Int. Conf. on Offshore Site Investigation & Geotechnics (SUT OSIG), 12-14th Sept., 2017. London, UK. pp. 914-921.
C91Wang, L., Coombs, W.M.,  Augarde, C.E., Brown, M. 2017. Implicit MPM with second -order convected particle domain interpolation in  Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 264-267. open access
C90Bing, Y., Charlton, T.J., Cortis, M., Coombs, W.M.,  Augarde, C.E. 2017. Boundary representation and boundary condition impostition in the material point method in  Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 256-260. open access
C89Charlton, T.J., Coombs, W.M.,  Augarde, C.E. 2017. On the implementation of gradient plasticity with the material point method in  Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 240-243. open access
C88Fan, L., Augarde, C.E., Coombs, W.M. 2017. The point collocation method with a maximu entropy approach in  Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 232-235. open access
C87Mukwiri, R., Y, Ghaffari Motlagh, Coombs, W.M.,  Augarde, C.E. 2017. Energy dissipation in granular materials in triaxial tests in  Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 191-193. open access
C86Cortis, M., Coombs, W.M.,  Augarde, C.E.,  Robinson, S.,   Brennan,  A., Brown, M. 2017. The modelling of soil-tool interaction using the material point method in  Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 211-213. open access
C85Hashim, N.A., Coombs, W.M.,  Hattori, G., Augarde, C.E. 2017. An implicit implementation of non-ordinary state-based peridynamics in  Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 134-137. open access
C84Ai, W.,  Augarde, C.E. 2017. Explicit crack modelling in 3D by the Cracking Particle Method  in Proc. 25th UK Conference on Computational Mechanics (UKACM 2017), 130-134. open access 
C83Cortis, M., Coombs, W.M.,  Augarde, C.E.,  Robinson, S.,  Brown, M. Brennan,  A. 2017. Modelling seabed ploughing using the material point method in Proc. First International Conference of the MPM Research Community on Modelling Large Deformation and Soil-Water-Structure Interaction (MPM 2017), Delft. open access 
C82Wang, L., Coombs, W.M.,  Augarde, C.E.,  Brown, M., Knappett, J.,  Brennan,  A., Humaish, A., RIchards, D. , Blake, A.  2017. Modelling screwpile installation using the MPM in Proc. First International Conference of the MPM Research Community on Modelling Large Deformation and Soil-Water-Structure Interaction (MPM 2017), Delft. open access
C81Charlton, T.J., Coombs, W.M.,  Augarde, C.E.,  2017. Gradient elasto-plasticity with the Generalised Interpolation Material Point Method in Proc.First International Conference of the MPM Research Community on Modelling Large Deformation and Soil-Water-Structure Interaction (MPM 2017), Delft. open access
C80Robinson, S.,  Brown, M.J.Z.,  Brennan, A.J.,  Cortis, M.,  Augarde, C.E., Coombs, W.M. 2016. Improving seabed cable plough performance for offshore renewable energy in Proc. of 2nd International Conference on Renewable Energies Offshore, RENEW 2016, Lisbon, 24-26 October 2016.
C79Smith, J.C., Augarde, C.E. 2016. Sample size choices for XRCT scanning of highly unsaturated soil mixtures in Proceedings of the 3rd European Conference on Unsaturated Soil Mechanics, Paris, September 2016.
C78Augarde, C.E., Beckett, C.T.S. , Smith, J.C., Corbin, A.  2016. Challenges in treating earthen construction materials as unsaturated soils in Proceedings of the 3rd European Conference on Unsaturated Soil Mechanics, Paris, September 2016.
C77Robinson, S.,  Brown, M.J.Z.,  Brennan, A.J.,  Cortis, M.,  Augarde, C.E., Coombs, W.M. 2016. Development of low cost 3D soil surface scanning for physical modelling in Proc. 3rd European Conference on Physical Modelling in Geotechnics (Eurofuge 2016), Nantes, 1-3 June 2016.
C76Ai, W.,  Augarde, C.E., Trevelyan, J. 2016. Branched crack modelling with the Cracking Particle Method in Proc. 24th Conference of the Association for Computational Mechanics in Engineering. Cardiff, UK, Cardiff University, Cardiff, 125-128.  Download this and the three papers below here
C75Charlton, T.J., Coombs, W.M., Augarde, C.E. 2016. Gradient elasticity with the material point method in Proc. 24th Conference of the Association for Computational Mechanics in Engineering. Cardiff, UK, Cardiff University, Cardiff, 112-115.
C74Mukwiri, R.A., Ghaffari Motlagh, Y., Coombs, W.M., Augarde, C.E. 2016. Energy dissipation in granular material under 1D compression in Proc. 24th Conference of the Association for Computational Mechanics in Engineering. Cardiff, UK, Cardiff University, Cardiff, 231-234.
C73Cortis, M., Coombs, W.M., Augarde, C.E. 2016. Implicit essential boundaries in the Material Point Method in Proc. 24th UK Conference of the Association for Computational Mechanics in Engineering. Cardiff, UK, Cardiff University, Cardiff, 116-119.
C72Leung, A.K., Anastasopoulos, I.X. Augarde, C.E. (and 24 others!) 2015. An overview of research activities and achievement in Geotechnics from the Scottish Universities Geotechnics Network (SUGN).  Proceedings of the 16th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), (Winter, M Ed.), Edinburgh, UK, September 2015, 4289-4294.
C71Corbin, A.J., Augarde, C.E. 2015. Investigating the shear behaviour of rammed earth using shear box tests  in Proceedings of the First International Conference on  Bio-Based Building Materials (ICBBM2015), Amiziane & Sonebi (eds), Clermont-Ferrand, RILEM Publications S.A.R.L.:Bagneaux, France. 93-98.
C70Charlton, T.J., Coombs, W.M., Augarde, C.E. 2015. On the implicit implementation of the Generalised Interpolation Material Point Method, Proc. 23rd ACME conference (Gil & Sevila, Eds), Swansea, April 2015.
C69Augarde, C.E., Smith, J.C., Corbin, A., Ciancio, D., Beckett, C.T.S. , Jaquin, P.A., 2015. Geotechnical aspects of earthen construction materials.  Proceedings of the 16th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), (Winter, M Ed.), Edinburgh, UK, September 2015, 535-540.
C68Smith, J.C.Augarde, C.E., 2015.The role of clay and sand in the mechanics of Soil-Based Construction Materials in Proc. First International Conference on Rammed Earth Construction (ICREC), Ciancio & Beckett (Eds), Perth, Australia, February 2015. ISBN 978-1-138-02770-1, 145-149
C67Wolf, L.A., Augarde, C.E., 2015. Investigating the lateral capacity of wall top fixings in rammed earth materials in Proc. First International Conference on Rammed Earth Construction (ICREC), Ciancio & Beckett (Eds), Perth, Australia, February 2015. ISBN 978-1-138-02770-1, 171-174.
C66Augarde, C.E., 2015. Earthen construction: a geotechnical engineering perspective in Proc. First International Conference on Rammed Earth Construction (ICREC), Ciancio & Beckett (Eds), Perth, Australia, February 2015. ISBN 978-1-138-02770-1, 17-26.
C65Smith, J.C., Augarde, C.E. 2014. XRCT scanning of unsaturated soil: microstructure at different scales? in Geomechanics from Micro to Macro, Soga et al. (Eds), 1137-1142.
C64Smith, J.C., Augarde, C.E., Beckett, C.T.S. 2014. The use of XRCT to investigate highly unsaturated soil mixtures, in Unsaturated Soils: Research and Applications, Khalili et al. (Eds) 719-725.
C63Charlton, T.M., Coombs, W.M., Augarde, C.E. 2014. A review of the material point method and its links to other computational methods, in Proc. 22nd ACME Conference, Exeter, April 2014.
C62Barnard, J.M., Augarde, C.E. 2013 Simulation mixing limited bimolecular reactive transport in porous media using particle tracking methods in Proc. CM13 (Osman et al. Eds), Durham University.
C61Ullah, Z., Coombs, W.M., Augarde, C.E. 2013 Three-dimensional FE-EFGM adaptive coupling and its applications in nonlinear adaptive analysis in Proc. CM13 (Osman et al. Eds), Durham University.
C60Beckett, C.T.S., Augarde, C.E. 2012. The effect of humidity and temperature on the compressive strength of rammed earth in Unsaturated Soils: Research and Applications (Mancuso et al. Eds), Springer:Heidelberg, 287-292.
C59Ullah, Z., Augarde, C.E. 2012. Adaptive modelling of finite strain shear band localization using the element free Galerkin method in Yang et al. (Eds) Proc. 20th ACME conference, Manchester University, March 2012, 251-254. ISBN 978-0-903808-06-4.
C58Lourenço., S.D.N., Gallipoli, D.,  Toll, D.G., Augarde, C.E. and Evans, F.D. 2012. Cavitation in high suction tensiometers: effect of temperature, time of use, and stone drying accepted for presentation at 5th Asia-Pacific Conference on Unsaturated Soils (AP-UNSAT 2012), 29 Feb – 2 March 2012, Pattaya, Thailand.
C57Koungelis, D.K., Augarde, C.E. 2011. Efficient pre-processing for finite element analysis of shallow tunnelling, Proc.15th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), Athens, Sept 2011, 1659-1664. doi:10.3233/978-1-60750-801-4-1659
C56Sheng, D., Augarde, C.E., Abbo, A. 2011. A fast algorithm for finding the first intersection with a  non-convex yield surface, Proc. ComGeo 2011, Dubrovnik, 27-29 April 2011.
C55Coombs, W.M., Crouch, R.S., Augarde, C.E. 2011. Unique Critical State hyperplasticity in Lagrouche et al. (Eds) Proc. 19th ACME conference, Heriot-Watt University, April 2011, 49-52. ISBN 978-0-9565951-1-9.
C54Barnard, J.M., Augarde, C.E. Computational modelling of remediated contaminated land: development of a new model for temperature dependent, reactive mass transport through variably saturated porous media.abstract in Lagrouche et al. (Eds) Proc. 19th ACME conference, Heriot-Watt University, April 2011, 177-180. ISBN 978-0-9565951-1-9.
C53Ullah, Z., Augarde, C.E., Crouch, R.S., Coombs, W.M.  2011. FE-EFGM Coupling using Maximum Entropy shape functions and its application to small and finite deformationin Lagrouche et al. (Eds) Proc. 19th ACME conference, Heriot-Watt University, April 2011, 277-280. ISBN 978-0-9565951-1-9.
C52Beckett, C.T.S, Augarde, C.E. 2010. Development of microstructure in compacted earth building materials, in Unsaturated Soils – Alonso & Gens (eds), Proc. UNSAT2010, Barcelona, Sept 6-8, 139-144.
C51Zhang, Y., Feng, X, Gallipoli, D., Augarde, C.E. 2010. Parameter Identification of BBM Model Using a Parallel Asynchronous Differential Evolution Algorithm, in Unsaturated Soils – Alonso & Gens (eds), Proc. UNSAT2010, Barcelona, Sept 6-8, 1001-1007.
C50Lourenço, S.D.N., Gallipoli, D., Toll, D.G., Augarde, C.E., Evans, F.D. 2010.  Advances in tensiometer-based suction control systems, in Unsaturated Soils – Alonso & Gens (eds), Proc. UNSAT2010, Barcelona, Sept 6-8, 695-700.
C49Heaney, C.E., Augarde, C.E., Deeks, A.J.,  Coombs, W.M. Crouch, R.S., 2010. Advances in meshless methods with application to geotechnics, Proc. NUMGE Trondheim, June 3-5, 239-244. 
C48Coombs, W.M., Crouch, R.S., Augarde, C.E., 2010. 70-line 3D finite deformation elastoplastic finite-element code, 2010, Proc. NUMGE Trondheim, June 3-5 2010, 151-156. 
C47Ullah, Z., Augarde, C.E. 2010. Solution of elasto-statics problems using the element free Galerkin method with local maximum entropy shape functions,  Proc. 18th UK Conference on Computational Mechanics, ACME, Southampton, 29-31 March 2010.
C46Zhuang, X. Augarde, C.E. 2010. A tying procedure for crack tip closure in fracture modelling using a meshless method and level sets,Proc. 18th UK Conference on Computational Mechanics, ACME, Southampton, 29-31 March 2010.
C45Heaney, C.E., Augarde, C.E., Deeks, A.J., Coombs, W.M., Crouch, R.S., 2010. A hybrid meshless method for modelling soils, Proc. 18th UK Conference on Computational Mechanics, ACME, Southampton, 29-31 March 2010.
C44Coombs, W.M., Crouch, R.S., Augarde, C.E., 2010. On the use of Reuleaux plasticity for geometric non-linear analysis, Proc. 18th UK Conference on Computational Mechanics, ACME, Southampton, 29-31 March 2010, 113-116.
C43Jaquin, P.A., Gerrard, C.M., Augarde, C.E., Canivell, J. 2010. Damage in historic rammed earth structures: A case study at Ambel, Zaragoza, Spain, in Fernades, M. et al. (eds) Proc 6.Seminario Arquitectura de Terra em Portugal, & 9. Seminario Ibero-Americano de Arquitectura e Construcao com Terra. (CD only),ISBN 978-972-8479-67-1, publ. Argumentum.
C42Canivell, J., Jaquin, P.A., Augarde, C.E., Gerrard, C.M. 2010. Sistemas de reparacion en fabricas historicas de tapial, in Fernades, M. et al. (eds) Proc 6.Seminario Arquitectura de Terra em Portugal, & 9. Seminario Ibero-Americano de Arquitectura e Construcao com Terra. (pg69), ISBN 978-972-8479-67-1, publ. Argumentum.
C41Toll, D.G., Gallipoli, D., Augarde, C.E., De Gennaro, V., Mancuso, C., Tarantino, A., Vaunat, J. & Wheeler, S.J. 2009. The MUSE Network: Research Outcomes. Proc. 4th Asia-Pacific Conference on Unsaturated Soils, Newcastle, Australia, (eds. O. Buzzi, S. Fityus, D. Sheng), London: Taylor & Francis Group, pp. 935-943.
C40Coombs, W.M., Crouch, R.S., Augarde, C.E. 2009. Influence of Lode angle dependency on the critical state for rotational plasticity in Onate et al. (Eds), Proc. COMPLAS X, Barcelona, 2-4 September.
C39Zhuang, X., Crouch, R.S., Augarde, C.E. 2009. A novel least squares-based finite cover method for elastoplastic problems in Onate et al. (Eds), Proc. COMPLAS X, Barcelona, 2-4 September.
C38Augarde, C.E., Heaney, C.E. 2009. The use of meshless methods in geotechnics in Pietruszczak et al. (Eds), Proc. ComGeo 1, Juan-les-Pins, France, April 29-May 1 2009, IC2E Rhodes, Greece, 311-320. pdf
C37Coombs, W.M., Crouch, R.S., Augarde, C.E. 2009. On the necessity for rotational yielding in anisotropic plasticity in Sansour (Ed.), Proc. 17th ACME Conference, Nottingham, April 6-8 2009, 345-348.
C36Bird, G.E., Trevelyan, J., Augarde, C.E. 2009. A coupled boundary integral method for accurate computation of stress intensity factors in Sansour (Ed.), Proc. 17th ACME Conference, Nottingham, April 6-8 2009, 205-208.
C35Zhang, Y., Matthews, C., Ramage, A., Augarde, C.E. 2009. Fast iterative solvers for geomechanics in a commercial FE code in Sansour (Ed.), Proc. 17th ACME Conference, Nottingham, April 6-8 2009, 369-372. pdf
C34Heaney, C.E. and Augarde, C.E. 2009. Modelling elasto-plasticity with the hybrid meshless scaled boundary method in Sansour (Ed.), Proc. 17th ACME Conference, Nottingham, April 6-8 2009, 133-136. pdf
C33Zhuang, X. and Augarde, C.E. 2009. The effects of nodal arrangement on solution accuracy in meshless methods in Sansour (Ed.), Proc. 17th ACME Conference, Nottingham, April 6-8 2009, 125-128. pdf
C32Augarde, C.E., Crouch, R.S., Li, T. Ramage, A. 2008. The Effects of Geotechnical Material Properties on the convergence of iterative Solvers, in Singh et al. (Eds), Proc. 12th IACMAG, Goa, India, October 2008. pdf
C31Bird, G.E., Trevelyan, J., Augarde, C.E. 2008. Efficient evaluation of stress intensity factors using a coupled BEM-SBFEM algorithm, Proc. WCCM8, June 30- July 5, 2008, Venice, Italy. Paper A442.
C30Jaquin, P.A., Augarde, C.E., Legrand, L. 2008 Unsaturated characteristics of rammed earth materials in Toll et al. (Eds), Unsaturated Soils. Advances in Geo-Engineering, Proceedings of the 1st European Conference, E-UNSAT 2008, Durham, United Kingdom, 2-4 July 2008, Taylor and Francis, London, 417-422.
C29Lourenço, S.D.N., Toll, D.G., Augarde, C.E., Gallipoli, D., Congreve, A., Smart, T., Evans, F.D. 2008. Observations of unsaturated soils by ESEM in dynamic mode in Toll et al. (Eds), Unsaturated Soils. Advances in Geo-Engineering, Proceedings of the 1st European Conference, E-UNSAT 2008, Durham, United Kingdom, 2-4 July 2008, Taylor and Francis, London,145-150.
C28Zhang, Y., Augarde, C.E., Gallipoli, D. 2008. Identification of hydraulic parameters for unsaturated soils using particle swarm optimization in Toll et al. (Eds), Unsaturated Soils. Advances in Geo-Engineering, Proceedings of the 1st European Conference, E-UNSAT 2008, Durham, United Kingdom, 2-4 July 2008, Taylor and Francis, London, 765-771.
C27Lourenço, S.D.N., Toll, D.G., Augarde, C.E., Gallipoli, D., Evans, F.D., Medero, G.M. 2008. Evaluation of suction measurement by the tensiometer and the axis translation technique in Toll et al. (Eds), Unsaturated Soils. Advances in Geo-Engineering, Proceedings of the 1st European Conference, E-UNSAT 2008, Durham, United Kingdom, 2-4 July 2008, Taylor and Francis, London, 213-218.
C26Mendes, J., Toll, D.G., Augarde, C.E., Gallipoli, D. 2008. A system for field measurement of suction using high capacity tensiometers in Toll et al. (Eds), Unsaturated Soils. Advances in Geo-Engineering, Proceedings of the 1st European Conference, E-UNSAT 2008, Durham, United Kingdom, 2-4 July 2008, Taylor and Francis, London, 219-225.
C25Bird, G.E., Trevelyan, J., Augarde, C.E., Chidgzey, S.R., Deeks, A.J. 2007. Coupling of the BEM with the SBFEM for fracture mechanics problems. In J. Trevelyan ed. Advances in Boundary Integral Methods, Proc. 6th UKBIM, 17-18 September 2007, Durham, UK. 233-240.
C24Heaney, C. E., Augarde, C. E. 2008. Stress Updating for the Hybrid Meshless scaled boundary method, in Rouainia (Ed.), Proc. 16th UK Conference on Computational Mechanics (ACME-UK), April 1-2, Newcastle upon Tyne.
C23Jaquin, P.A., Augarde, C.E., Gerrard, C.M. 2007. Historic rammed earth structures in Spain: construction techniques and a preliminary classification. In: B.V. Venkatarama Reddy & M. Mani eds. International Symposium on Earthen Structures, 22-24 August 2007, Bangalore, India. Bangalore: Interline Publishing, pp. 327-333. ISBN 81-72960514.
C22Mendes, J., Gallipoli, D., Augarde, C.E., Toll, D.G., Medero, G.M. 2007. Suction measurements of a sandy-clay soil with the filter paper technique accepted for presentation at the 6th Brazilian Symposium of Unsaturated Soils, NSAT2007, 1-3 November, Salvador, Brazil.
C21Zhang, Y.L., Gallipoli, D., Augarde, C.E. 2007. Parallel Computing of Unsaturated Soils Using Element-By-Element and Domain Decomposition Methods, Proc. 3rd Asian Conf. on Unsaturated Soils, Nanjing, China (ed. Z.Z. Yin, J.P. Yuan & A.C.F. Chiu), Beijing: Science Press, pp. 425-430. Paper as pdf (170k).
C20Chidgzey, S.R. , Deeks, A.J., Augarde, C.E. 2006. Penalty method approaches for the scaled boundary method with a reduced set of basis functions, The Tenth East Asia-Pacific Conference on Structural Engineering and Construction August 3-5, Bangkok, Thailand
C19Jaquin, P.A., Augarde, C.E., Gerrard, C.M. 2006. Analysis of historic rammed earth construction. In Lourenco et al. eds. Proc. 5th Int. Conf. Structural Analysis of Historical Constructions, Nov 6-8, New Delhi, India. Delhi: Macmillian India Ltd. Vol.2, 1091-1098. ISBN 1403-93156-9. Paper as pdf (1077K)
C18Gallipoli, D., Toll, D.G., Augarde, C.E., Tarantino, A., De Gennaro, V., Vaunat, J., Wheeler, S.J., Mancuso, C. 2006. The MUSE Network: sharing research expertise on unsaturated soils across Europe. Proceedings of the Fourth International Conference on Unsaturated Soils, Carefree, Arizona, ASCE:New York. pp. 2075-2085. Paper as pdf (387K)
C17Chidgzey, S.R. , Deeks, A.J., Augarde, C.E. 2006. A penalty method approach to boundary conditions for the scaled boundary method with a reduced set of basis functions, ACME conference, April, Belfast. pp. 87-90. Paper as pdf (417K).
C16Augarde, C.E., Deeks, A.J. 2006. A coupled meshfree/scaled boundary method, in Liu et al. (eds) Computational Methods: Proc. of First International Conference on Computational Methods, Singapore (2004). Springer:Dordrecht, pp1429-1433. Paper as pdf (130K).
C15Augarde, C.E., J. Staudacher, J., Ramage, A.. 2005. On preconditioning strategies for geotechnics, 11th International Conference of IACMAG, 19.-24.06, Turin, Vol. 1, pp3-11; Patron Editore, Bologna; ISBN 88-555-2812-1. Paper as pdf (146K).
C14Lazarov, B., Augarde, C.E.. 2005 Object Oriented Design of Parallel and Sequential Finite Element Codes. 13th ACME conference, Sheffield, March 21-22. Paper as pdf (70K).
C13Koungelis, D.K., Augarde, C.E. 2004. Interaction between multiple tunnels in soft ground, in Deeks & Hao (eds) Developments in Mechanics of Structures and Materials, Proc. 18th Australasian Conference on the Mechanics of Structures and Materials, Perth, Australia, December 1-3. Taylor and Francis:London, Vol. 2, 1031-1036. ISBN 90 5809 659 9. Paper as pdf (339K).
C12Jaquin, P.A., Augarde, C.E., Gerrard, C.M. 2004. Analysis of Tapial structures for modern use and conservation in Modena et al. (eds) Structural Analysis of Historical Constructions: Possibilities of numerical and experimental techniques, Proc. Symposium on Structural Analysis of Historical Constructions, Padua, November. Taylor and Francis:London, Vol. 2, 1315-1321. ISBN 04 1536 379 9 Paper as pdf (473k)
C11Deeks, A.J., Augarde, C.E. 2004 Stresses around a square tunnel using a meshless scaled boundary method. ACME conference, Cardiff, April 5-7. Paper as pdf (301k)
C10Ford, T.E., Augarde, C.E., Tuxford, S.S., 2003. Modelling masonry arch bridges using commercial finite element software, Proc. 9th International Conference on Civil and Structural Engineering Computing, September 2003, Holland, Paper 101, ISBN 0-948749-88-1, Stirling:Civil-Comp Press. Paper as pdf (497k)
C9Augarde, C.E., Davey, J.D. 2001. Modelling skew arch behaviour, Proc. 3rd International Conference on Arch Bridges, Paris, ENPC, 499-504. ISBN: 2859783474
C8Bloodworth, A.G., Houlsby, G.T., Burd, H.J., Augarde, C.E. 2001. Three-dimensional modelling of the interaction between buildings and tunnelling operations, Proc. CIRIA conference on Settlement Damage to Buildings, London, July 2001. Paper as pdf (257k)
C7Wisser, C., Augarde, C.E., Burd, H.J. 2001. Three-dimensional finite element analysis of compensation grouting in Desai et al. , Computer Methods and Advances in Geomechanics, Proc. IACMAG 10, Tucson, Arizona. Rotterdam:Balkema, 1731-1736.
C6Bloodworth, A.G., Augarde, C.E., Houlsby, G.T. 1999. Transferring a non-linear finite element code to the Oxford Supercomputer, Oscar in Topping & Kumar (eds), Proc. 7th Int. Conf. on Civil and Structural Computing, Oxford, 13-15 September. Edinburgh:Civil-Comp Press, Vol. B, 85-94. Paper as pdf (265k).
C5Augarde, C.E., Wisser, C., Burd, H.J. 1999. Numerical modelling of tunnel installation procedures, in Pande et al., Numerical Models in Geomechanics , Proc. 7th International Symposium on Numerical Methods in Geomechanics – NUMOG VII, Graz, 1-3 September, Balkema:Rotterdam, 329-334.
C4Houlsby, G.T., Burd, H.J., Augarde, C.E., 1999. Analysis of tunnel-induced settlement damage to surface structures in Barends et al. (eds) Geotechnical engineering for transportation infrastructure, Proceedings of the 12th European Conference on Soil Mechanics and Geotechnical Engineering, Amsterdam, 7-10th June, Balkema:Rotterdam, Vol. 1, 147-152. Paper as pdf (98k)
C3Augarde, C.E., Burd, H.J., Houlsby, G.T. 1998. Some experiences of modelling soft ground tunnelling using three-dimensional finite elements in A.Cividini (ed.) Application of numerical methods to geotechnical problems, Proceedings of the 4th European Conference on Numerical Methods in Geotechnical Engineering, Udine. Wien:Springer-Verlag, 603-613.
C2Augarde, C.E., Burd, H.J., Houlsby, G.T. 1995. A three dimensional finite element model of tunnelling in G.N. Pande & S. Pietruszczak (eds.) Proceedings 5th International Symposium on Numerical Models in Geomechanics – NUMOG V, Davos.Balkema:Rotterdam, 457-462.
C1Burd, H.J., Houlsby, G.T., Chow, L., Augarde, C.E., Liu, G. 1994. Analysis of settlement damage to masonry structures in I.M. Smith (ed.) Proceedings 3rd European Conference on Numerical Methods in Geotechnical Engineering, Manchester. Balkema:Rotterdam, 203-8.

Theses

  • Augarde, C.E., 1997. Numerical modelling of tunnelling processes for assessment of damage to buildings, D.Phil. thesis, University of Oxford. Full thesis available as a PDF from the Oxford Research Archive here
  • Augarde, C.E. 1993. Three-dimensional adaptive mesh generation, M.Sc. thesis, Heriot-Watt University, Edinburgh